29" Sunstone Universal Appliance Jacket - Item No. SUNJK29

The 29 In. Sunstone Universal Appliance Jacket for SUN24PCB is uniquely designed to receive multiple Power Burner Brand Models right out of the box with minor assembly. The jacket is a safety essential when installing your power burner into any outdoor kitchen or BBQ island enclosure ensuring you have adequate heat barrier and proper venting and can be installed in either a High or Low position. This jacket has double walled construction in all 304 stainless steel with a sturdy self-supporting raised ledge around the sides and back that adds one more layer of quality to your outdoor kitchen. The Sunstone Jacket is made for perfect airflow with in/out vents in the lower front bottom edge and upper back edge which features open vents allowing pass-through venting of all excess heat and dangerous gasses. It has a universal design with covered utility ports on either side depending on which side your appliance gas or electrical is connected, you only need to open the specific ports you are using, and others stay covered for safety. The Jacket is compatible with most burners with a max “CUT-OUT” size between 23 In. Width by 12 In. Height by 22 In. Depth, with the burner placed on top of the upper rim so the burner is free hanging within the interior of the jacket enclosure. In addition, you can fasten in the bottom of each corner a cabinet peg-leg allowing you to place the jacket with burner onto any surface like a picnic table or blocks for when you’re ready for your new burner or grill but not ready for the whole kitchen island. Make your kitchen a snap with the complete Jacket, Wings & Post Mount package combined to allow your burner or grill to free-stand in a stationary position as a Post-Mount Burner or Grill of your choice. See the Jacket Specification Sheet for more information, the second page refers to your burner “Cut-Out” Dimensions. Convert your jacket into a Post-Mount Grill by purchasing the Jacket Side Wings & Post Mount Item No. SUNJKWING, & SUNJKPOST. Additionally, purchase the SUNJKDIV6 to expand the jacket package with multiple other appliances all within a single cut-out.

• Works w/SUN24PCB
• Lifetime Structure Warranty
• 304 Stainless Steel Structure
• Raises Burner 1 Inch above Counter
• Minor Assembly Required
• Zero Clearance Design
• Universally Compatible
• Left/Right Utility Ports
• Double Walled Barrier
• Pass-Through Venting