Sunstone 30" Kamado Base Cabinet for up to 24" Kamado or Power Cirque SUN24PCB - SAC30KBDC

The 30" Sunstone Combo Kamado Hybrid Power Burner Base Cabinet (SAC30KBDC) is one cabinet you can set up several ways: for a kamado up to 24" in diameter, or for the Sunstone 24" Power Cirque burner (SUN24PCB). It is 304 stainless steel and has two soft-close drawers.

With the main front trim-kit face plate installed, a kamado sits on top with access to its lower ash tray through the bottom vented door panel. Front panel mounts include a floating shelf for extra work space or a speed rail shelf for front-load storage. Take out the center top panel to install the Power Cirque burner, or remove the bottom vent door panel to make room for a larger kamado's front bulge. For a shorter kamado, add the optional 2" riser support (SCC30KB-RISER) for 11-3/4" H, or 12-1/2" H with a 3/4" counter. The included measurement guide mat goes under the kamado to center it and protect the finish.

Kamado fit with the center panels installed: Blaze 20-Inch Cast Kamado, Joe Classic II 18-Inch Kamado and Caliber Pro Stainless-Steel Kamado. With the center panels removed it also takes the Big Joe II 24-Inch Kamado and Pro Joe 24-Inch Ceramic Kamado. Burner fit with the center top panel removed: Sunstone 24" Power Cirque, Coyote Power Burner (C1PBNG), Twin Eagles Power Burner (TEPB24HG-CN) and Alfresco 24-Inch Versa Power (AXEVP-LP). The burner cut-out is 22-3/4" W x 8-1/2" H x 24-1/2" max D; add a 1" counter for a 9-1/2" cut-out height.

The cabinet uses pin-lock installation. It ships fully assembled. You fasten the four included adjustable peg-legs, screw on the 304 stainless steel rod handles and mount the front and back kick-plates. The trim-kit on the front face adapts the cabinet to your kamado or burner: check page two of the Cabinets Specification Sheet, match your cut-out to the right trim-kit and specify it on your order. See our warranty page for coverage.

Warranty

Coverage depends on the product. See the warranty page for the full terms.

Shipping & Delivery

All orders ship free to the 48 contiguous United States.

Larger (freight) shipments are curb-side only. A signature and possibly assistance may be required for unloading. We will work with you to arrange a delivery date and time, but the final details will be between you and the freight carrier.

IMPORTANT: ALL LTL DELIVERIES ARE CURBSIDE UNLESS WHITE GLOVE FEES ARE PAID. All reports of damage must be made within 3 business days after delivery.

Receiving Your Shipment

When the shipment arrives, please do the following:

• Inspect every box carefully before signing. There is no such thing as damage that is too small: dents, tears, crushed corners, punctures, or scuffs should all be noted.
• Take clear photos of any box that shows damage.
• On the delivery receipt, write down exactly how many boxes have visible damage. If it is electronic, have the driver show you where to notate the damage. Before handing it back, take a photo of the document showing your notation.

After the driver leaves, please immediately open and inspect the items themselves. If you find any damage, contact us with the following:

• A photo of the item unboxed with the damage visible
• A close-up photo of the actual damage
• A photo of the delivery document where you noted the box damage

These steps ensure we can file a claim quickly and get any replacement parts or items to you without delay.

Returns & Exchanges

Returns are accepted within 60 days of original purchase, in original packaging and unused, for a full refund minus a 15% Restocking Fee.

We recommend insuring products when shipping back to us. Returns will be rejected if the product is received damaged.

Full Shipping Policy → · Return Policy →