Cabinet Accessories
Finish hardware for Sunstone islands: universal kick plates, end panels, corner guards, spacer strips, casters, adjustable peg legs, bar handles, and door hinges. These are the pieces that make a 304 stainless run look built-in.
Cabinet Accessories
Every exposed island end needs a panel and a kick plate. Spacers close gaps to a wall or appliance, and casters or peg legs set the height. Handles and Designer hinges match the rest of the run. Panels pin-lock, legs thread in, and it's all 304 stainless.
- End panel and kick plate for a finished end
- 3" and 6" front and back spacers
- Left and right corner guards
- SAWC / SLWC casters, SCCADL legs
- De-H6.25 handles, De-Hinge Designer hinges
Universal kick plate
Universal end panel
3" / 6" front and back spacers
Corner guards left and right
Casters and peg legs
Handles and Designer hinges
| Specification | Value | |
|---|---|---|
| Material | 304 stainless steel | |
| Fit | All Sunstone base cabinets | |
| Hardware | Peg legs, casters, hinges, handles | |
| Warranty | View warranty | View warranty → |
Material
- Value
- 304 stainless steel
Fit
- Value
- All Sunstone base cabinets
Hardware
- Value
- Peg legs, casters, hinges, handles
Cabinet Accessories in this collection
12 cabinets in this collection, each listed with width, cut-out, and material.
Ends & kicks
Universal end panel and kick plate
Spacers
3" / 6" front, back, and 90°
Legs, casters & hardware
Peg legs, wheels, handles, hinges, HGDC arms
Greater detail on cabinet accessories
Close the end
The universal end panel plus a kick plate is the standard finish for an exposed end. Pin-lock, no tools.
Stay on the 3" grid
3" and 6" front and back spacers plus a 90° corner spacer keep the run tight to a wall or appliance.
Set the height
Peg legs (SCCADL) or casters (SAWC aligned, SLWC locking swivel) thread into the cabinet floor.
Built as part of a Sunstone island
Warranty
304 stainless cabinet bodies carry the same structural warranty as the rest of the island.
Learn more →304 Stainless Steel
No coated mild steel. Outdoor-rated stainless through the box, doors, and hardware.
Pin-Hinge Assembly
Cabinets lock to their neighbors without a contractor. Utility access ports and access points make the install easy.
Ships Fully Assembled
304 stainless cabinets arrive ready to pin-lock. Fasten the handles, screw in the legs, and snap on the kick plates.
Free Freight
Free freight shipping to the 48 contiguous states on cabinet orders.
Designed in Texas
Sunstone has built modular outdoor islands since 2001. Every cabinet pin-locks to the next for a single stainless run.
Wall Cabinet Accessories
Order end panels for any exposed side, spacers when the wall run needs to land on a 3" module, and crown to close the top to a soffit or open ceiling. Heights match SWC full-height (42" + 2" crown) and standard (21") boxes. Pin-lock install, same 304 stainless as the wall cabinets.
- Standard and full-height end panels
- 3" and 6" front spacers
- 90° corner spacer
- End crown
Shop wall cabinet accessories
| Specification | Value |
|---|---|
| Material | 304 stainless steel |
| Heights | 21" and 42" ends |
| Use with | SWC wall cabinets only |
| Crown | +2" on full-height runs |
Material
- Value
- 304 stainless steel
Heights
- Value
- 21" and 42" ends
Use with
- Value
- SWC wall cabinets only
Crown
- Value
- +2" on full-height runs
Wall Cabinet Accessories in this collection
6 cabinets in this collection, each listed with width, cut-out, and material.
End panels
21" standard and 42" full-height
Spacers
3" / 6" front and 90° corner
Crown
End crown, left or right