The Sunstone 90 degree 3 In. x 3 In. spacer panel is designed to form a tight inside 90-degree corner in the cabinet island configuration. The panel is measured at 3 In. width x 3 In. width by 90 degree inside radius x 34-1/2 In height including kick plate. The corner panel constructed with all 304 stainless steel with a #4 brushed finish matching with all other Sunstone cabinets and products. It is easily installed with simple pin-locks, simply align any two opposing cabinets 90-degrees to one another and simply lift and drop the panel in between the two – pushing down to secure tight in position. The panels comes standard with the bottom kick plate and top matching counter rail, same as all other cabinets allowing for the installation of full bull-nose counters to be placed. Most often this panel will be used in conjunction with setting up your cabinet island into a corner spot, this panel is for the front facing corner only, your installer will be required to build support column in back for supporting the back of counter against wall.