ODK Components

 

Classic Series Flush Style

The Sunstone Classic Series, Flush Styles creates a High Quality yet Cost-Effective alternative to complete your outdoor kitchen. Great for Stone Veneer, Brick and Stucco or Concrete Finishes with its all 304 Stainless Steel and 16 Gauge door frame and panels hold stronger against the weather and usage over time, while the Door Panel is 18 Gauge. Find everything you need with the largest variety of all our component lines. All Classic Series Doors & Drawer Components blend perfectly with all other Sunstone Doors and Drawers, unlike many other competing doors who have limited selection, this is just one of a many options in all similar matching Doors and Drawers for your Outdoor kitchen.

Material & Construction

Style & Design

Installation Types

Complimentary Features

The Doors are made with all 16 Gauge 304 Stainless Steel, with a Solid Internal Framed Construction. The Door Frame is 16 Gauge – this thicker material means the door frame and panels hold stronger against the weather and usage over time, while the Door Panel is 18 Gauge, and is Framed Inward to insure the doors Hold Strong over many years of regular usage.
The Classic Series Doors are the Most Sleek and Stylish of all our many series of components with its even #4 Light Brushed Finishes, it shines and glimmers in the sun light complementing your Outdoor Kitchen and all the effort you are putting in, you will cherish the complimenting durability and good looks that our Doors provide, more than just functional access doors but a true example of your Outdoor Living Lifestyle.
The Classic Series Doors are designed for Stone Veneer, Brick and Stucco or Concrete Finishes. They have a 1-5/8” deep install flange – enough to secure against the internal framing of most outdoor kitchen islands, and it has a 1-1/2” Outer Flange which rest against the finished wall covering the Rough Cut-Out Edge Line.
All Classic Series Doors & Drawer Components blend perfectly with all other Sunstone Doors and Drawers, unlike many other competing doors who have limited selection, this is just one of a many options in all similar matching Doors and Drawers for your Outdoor kitchen. Ways Doors can be used: Under Grill Utility Access, Under Sink Plumbing Access, Build Internal Shelving, Install own Key-Lock Entry, Access interior of Island, Place Trash Bins inside, Place Propane Tank inside.

Signature Series Beveled Style

The Sunstone Signature Series, Beveled Style creates a unique class of its own specially made with deeper 2-1/2" mounting flange great for Veneer & Masonry Stone Islands with angular edges and contemporary squared handles. All doors are offered with Heavy-Duty 304 Stainless Steel suitable for all weather conditions with a Beveled Raised Frame and Interior Framed-In Doors for added Door Stability and long lasting Strength. All doors have built-in hinges allowing the doors to open 120 degrees and will not bang on island stone, while all drawers are offered with Soft-Closing drawer tracks and Reinforced Frames, Pantries have Double Panel Doors, with Adjustable Shelves and Paper Towel Holders options.

Framed-In Door Construction

Extra-Deep Mounting Flange

Beveled Frame & Built-In Hinges

Complimentary Features

Sunstone Signature Series Beveled Framed Components are Quality Constructed with all 304 Stainless Steel suitable for all weather conditions with a Beveled Raised Frame and Interior Framed-In Doors for added Door Stability and long lasting Strength.
All Signature Series Doors feature Extra-Deep 2-1/2 Inch Mounting Flanges. Making them perfect for most any installation type like Stucco, Veneer, Brick and even Masonry Stone. The Doors are offered with 16 Gauge Heavy Duty Door Frame and Mounting Flange and have Pre-Cut Holes making installation very easy.
With its Beveled Edge and Built-In Hinges, all Signature Series Components are Ideal for nearly every application and with Great Looks! The Built-In Hinge insures the Doors DO-NOT Bang on the adjacent wall Stone causing dings or scratches on the material. While the Beveled Edge allows the doors to be installed against most any Rough Stone surface.
All Classic Series Doors & Drawer Components blend perfectly with all other Sunstone Doors and Drawers, unlike many other competing doors who have limited selection, this is just one of a many options in all similar matching Doors and Drawers for your Outdoor kitchen. Ways Doors can be used: Under Grill Utility Access, Under Sink Plumbing Access, Build Internal Shelving, Install own Key-Lock Entry, Access interior of Island, Place Trash Bins inside, Place Propane Tank inside.

 

Designer Series Raised Style

The Sunstone Designer Series, Raised Style are the designers true friend with seamless horizontal lines all components have 23" matched heights and raised off the finish wall 1-1/2" inches so to work with most any island structure including Veneer Stone, Stucco and as extra 4” inch deep inside flange to work with all Masonry Stone types. In Addition the frame is designed with an additional 1/16” inch frame around all four sides of component. Which makes the components multi-configurable Vertically & Horizontally Door within a Single Cut-Out. All Designer Series Components with a either Drawer or Cabinet Box includes Two Self-Leveling Adjustable Peg-Legs. Simply Block up the Front of the component and adjust down the Peg-Legs supporting the back of the box at either ground level or when Stacked into unlimited configurations.

Vertically & Horizontally Configurable

Water-Shed Rain Gutters Adjustable Peg-Legs Extra-Deep Flange & Cabinet Door Hinges
All Components are Horizontally & Vertically Configurable using any two or more Door, Drawer or Cabinet Components. Each Component has Built-In 1/16" Bevel Frame around all Four Sides, so when any Two are either Stacked or Placed Side-by-Side this combined package will now function as One Single Unit. Add 1-3/4" Additional Spacing to your Cut-Out's Height or Width depending on your placement. Also see Adjustable Peg-Legs for further Stacking and Leveling Adjustments.
All Designer Series Drawer & Door Panels are specially designed with Built-In Water-Shed Channels which help to Shed-Away nearly 90% of all Water from Storms or Sprinklers from getting in the inside Drawer Compartments. For most Outdoor Kitchen components - Water build-up in the drawer or doors boxes is a major issue, which leads to Rust Pitting of the Surface and can Stain your steel. You can rest easy - knowing your Sunstone Designer Series Components are well designed and built.
All Designer Series Components with a either Drawer or Cabinet Box includes Two Self-Leveling Adjustable Peg-Legs. Simply Block up the Front of the component and adjust down the Peg-Legs supporting the back of the box at either ground level or when Stacked into unlimited configurations. Peg-Legs feature a Thumb-Screw on the inside of the box, for easy setup - simply remove the Drawer to drop the leg in back after it is inserted into island cut-out. Leveling is a breeze.
Specially Designed to meet the Heavy Duty Requirements of the Masonry Kitchen, with thicker walls as much as 12" Inches thick in some cases make it very difficult to install most BBQ Doors. Not the Designer Series Access Doors, with it's Built-In 4-1/2" Deep Installation Flange, coupled with the 16 Gauge all 304 Stainless Steel Frame these Doors are sure to last for many more years and are large enough to store All your Outdoor Kitchen components.
×
Welcome Newcomer